La description

  • Constant, surface-independent measured values
  • Highly precise measurement with a maximum linearity deviation of 0.05%
  • Industry 4.0 compatible thanks to Industrial Ethernet
  • Thermally stable measured values without any warm-up phase
Sensors from the PNBC range work with a high resolution CMOS line array and determine distance to the object by means of angular measurement. Top quality optics permit measured values with 16-bit resolution. Thanks to proven algorithms, stable measured values are obtained even for complex surfaces, for example sheet metal with speckle effect. They demonstrate outstanding accuracy with maximum linearity deviation of just 0.05%, and required only a short warm-up phase thanks to minimized temperature drift. Values are read out simultaneously via the analog output and the interface. Up to 4 switching outputs can be taught in externally. An incremental encoder input rounds the product out.
Working Range 90...190 mm
Measuring Range 100 mm
Resolution 1,5 µm
Linearity Deviation 50 µm
Light Source Laser (red)
Wavelength 658 nm
Service Life (T = +25 °C) 100000 h
Laser Class (EN 60825-1) 2
Max. Ambient Light 10000 Lux
Light Spot Diameter < 0,75 mm
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) 280 mA
Switching Frequency 15 kHz
Response Time < 33 µs
Output rate 10...30000 /s
Temperature Drift 0,005 %/K
Temperature Range -10...40 °C
Number of Switching Outputs 4
Switching Output Voltage Drop < 1,5 V
Switching Output/Switching Current 100 mA
Analog Output 0...10 V/4...20 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Teach Mode VT, FT
Interface Ethernet TCP/IP
Baud Rate 100 Mbit/s
Protection Class III
FDA Accession Number 1620645-000
Mechanical Data
Setting Method Teach-In
Housing Material Aluminum
Degree of Protection IP67
Connection M12 ? 1, 8-pin
Type of Connection Ethernet M12 ? 1, 4-pin, D-cod.
Optic Cover Glass
Weight 240 g
General Data
Web server yes
Scope of delivery Calibration report
Output
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
''