La description

  • CMOS line array
  • Highly accurate switching distance
  • Minimal switching hysteresis
  • Special coated optics
These sensors work with a high-resolution CMOS line and DSP technology and determine distance using angular measurement. As a result, material, color and brightness related switching point differences are virtually eliminated. Two independent switching outputs are available, at which two switching thresholds and one on or off-delay time (in 10 ms steps) can be configured. Sensor functions can be activated, and scanning results can be acquired via the RS-232 interface.
Range 660 mm
Adjustable Range 60...660 mm
Switching Hysteresis < 1 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10000 Lux
Light Spot Diameter see Table 1
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 100 Hz
Response Time < 5 ms
On-/Off-Delay (RS-232) 0...1 s
Temperature Drift < 50 µm/K
Temperature Range -25...60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1,5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Baud Rate 38400 Bd
Protection Class III
FDA Accession Number 1120728-000
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Coated Optics yes
Degree of Protection IP67
Connection M12 ? 1, 8-pin
Output
Error Output yes
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
RS-232 Interface yes
''