La description

  • Recognition of clear glass
  • Simple installation
  • Teach-in, external teach-in
A reflector must be used in combination with these sensors. wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation, and can be easily protected as well. Time delay can be activated by RS-232 interface.
Range 4000 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition yes
Switching Hysteresis < 5 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle 5 °
Single-Lens Optic yes
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 2 kHz
Response Time 250 µs
On-/Off-Delay (RS-232) 0...5 s
Temperature Drift < 5 %
Temperature Range -10...60 °C
Switching Output Voltage Drop < 2,5 V
NPN Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Teach Mode NT, MT
Protection Class III
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Full Encapsulation yes
Degree of Protection IP67
Connection M12 ? 1, 4-pin
Output
NPN NO/NC switchable yes
RS-232 with Adapterbox yes
''