La description

  • MultiCore technology
  • OCR reading
The OCR reader is based on the wenglor MultiCore technology and reads up to 100 characters simultaneously. The functions autofocus, region of interest and tracking are available for improved plain text reading. Reliable reading, comparing and good/bad-evaluation of various characters and symbols are easily possible.
Working Range ? 20 mm
Resolution 736 ? 480 Pixel
Image Chip monochrome
Light Source Infrared Light
Service Life (T = +25 °C) 100000 h
Visual Field see Table 1
Frame Rate 25 Hz
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Response Time 40 ms
Temperature Range -25...55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III
Mechanical Data
Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 ? 1, 12-pin
Type of Connection Ethernet M12 ? 1, 8-pin, X-cod.
Safety-relevant Data
MTTFd (EN ISO 13849-1) 230,41 a
General Data
Web server yes
Function
OCR yes
Tracking yes
Output
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.''